Analysis of potenciality for the use of compounds based on MgSO4 and MgB4O7 for beta radiation monitoring
Keywords:
TL dosimetry, sulphates, beta radiationAbstract
The thermoluminescent dosimeters have a crucial paper in radiation measurement in these types of procedures. Sulfates, such as dosimetric material, has been used for more than 20 years. The phosphor which has been investigated for dosimetry is magnesium sulfate. The objective of this study was to present some results of development of dosimeters based on magnesium sulfate for beta dosimetry (The literature presents results for materials stimulated with gamma radiation, x-ray, etc.). The composites studied were : MgSO4: Dy ;MgSO4: Tm and MgB4O7: Dy. Samples of MgSO4: Tm and MgB4O7: Dy were produced through an adaptation of the crystal growth method described by yamashita in 1971, and the MgSO4: Dy was produced through a new method called recrystallization, replacing the acid with water. After the crystals growth, the materials suffer thermal treatment at 900 ° C for 5 hours for magnesium sulfate and 400 ° C for two hours for magnesium tetraborate, and then were submitted to irradiation with beta source 90Sr +90 Y, with doses from 1 to 40 Gy. Finaly, were obtained the thermoluminescent response curves. Through the results obtained, it can be concluded that the material presented has potential for measuring beta radiation. The TL emission curves presented emission peaks between 70 ° C and 350 ° C, which is a temperature range suitable for dosimetry.Downloads
Published
2012-06-22
How to Cite
Cruz, A. R., Souza, D. N., Souza, L. F., & Vasconscelos, D. F. (2012). Analysis of potenciality for the use of compounds based on MgSO4 and MgB4O7 for beta radiation monitoring. Scientia Plena, 8(3(b). Retrieved from https://scientiaplena.org.br/sp/article/view/988
Issue
Section
Articles
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work