Numerical analysis of the mechanical behavior of thin perforated composite material plates under bending

Authors

  • Sandro Troian Universidade Federal do Rio Grande
  • Caio Cesar Cardoso da Silva Universidade Federal do Rio Grande
  • Luiz Alberto Oliveira Rocha Universidade Federal do Rio Grande do Sul
  • Elizaldo Domingues dos Santos Universidade Federal do Rio Grande
  • Liércio André Isoldi Universidade Federal do Rio Grande
  • Mauro Vasconcellos Real Universidade Federal do Rio Grande

DOI:

https://doi.org/10.14808/sci.plena.2015.081309

Keywords:

Composite Materials, Bending, Finite Element Method (FEM)

Abstract

This paper seeks to analyze numerically the mechanical behavior of plates made of two composites materials submitted to bending caused by an uniform transverse static loading, when compared to the behavior of an isotropic material plate. Plates with a centered elliptical hole are considered in this study. According to Constructal Design method, this elliptical hole can vary as a function of the parameter H0/L0 (ratio between semi-axes of the ellipse). However, the ratio between hole volume and plate volume (f) is kept constant. Thus it is possible to evaluate the influence of the hole geometry on the mechanical behavior of the plate with the objective of minimizing the deflection suffered by the plate. In addition, plates with three different kinds of boundary conditions were considered: simply supported on four sides, clamped on four sides and simply supported on two opposite sides and clamped on the other two. A computational model developed in ANSYS software, which is based on the Finite Element Method (FEM), was used to numerically simulate the bending on the plates. The results showed that the hole geometry has a significant influence on the performance of plates as structural components. Improvements up to approximately 115% were obtained for the maximum deflection of the plate.

Author Biographies

Sandro Troian, Universidade Federal do Rio Grande

http://lattes.cnpq.br/1078550451070292

Caio Cesar Cardoso da Silva, Universidade Federal do Rio Grande

 http://lattes.cnpq.br/3873587432284936

Luiz Alberto Oliveira Rocha, Universidade Federal do Rio Grande do Sul

http://lattes.cnpq.br/2535324018884724

Elizaldo Domingues dos Santos, Universidade Federal do Rio Grande

http://lattes.cnpq.br/6854950768271660

Liércio André Isoldi, Universidade Federal do Rio Grande

 http://lattes.cnpq.br/3761060945802171

Mauro Vasconcellos Real, Universidade Federal do Rio Grande

http://lattes.cnpq.br/1131858526704034

Downloads

Published

2015-08-31

How to Cite

Troian, S., Cardoso da Silva, C. C., Oliveira Rocha, L. A., Domingues dos Santos, E., Isoldi, L. A., & Vasconcellos Real, M. (2015). Numerical analysis of the mechanical behavior of thin perforated composite material plates under bending. Scientia Plena, 11(8). https://doi.org/10.14808/sci.plena.2015.081309

Issue

Vol. 11 No. 8 (2015): August/Agosto 2015

Section

VI Conferência Sul em Modelagem Computacional

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work

Most read articles by the same author(s)

<< < 1 2 3 4